Pub Night on 29th Sept

Hi ECE grads,  

The ECEGSS is hosting a pub night this Wednesday, September 29th at 7 pm for all incoming and returning ECE graduate students. Join us for drinks, food, ice breaker games and challenges! The event will take place at TacoTaco (319 Augusta Ave). All attendees will receive a free drink and appetizer ticket.  

In order to enter the venue, attendees must be fully vaccinated against COVID-19. Please bring proof of vaccination, a government-issued ID, and a TCard to verify student status.  

Tickets are limited! Please register for the event here:  https://www.eventbrite.co.uk/e/179303811527

All tickets will be refunded shortly after attending the event. If you are no longer able to attend after registering, please let us know and we will cancel the registration. 

See you there!  

Action Required: ECEGSS 2021-22 elections are ongoing, please cast your vote here

ECEGSS

ECEGSS AGM – 24 Sept

ECE Grads,

ECEGSS will be holding their Annual General Meeting on Friday September 24th at 3pm. The meeting will be held virtually, using Zoom. The election for this year’s executives will be held at the Annual General Meeting, so please make sure to attend the AGM to meet the candidates for those positions and cast your votes.

All the attendees would be given gift cards 20$, either Uber Eats or Amazon.

Zoom details are as follows:
Topic: ECEGSS Annual General Meeting and Election
Time: Sep 24, 2021 03:00 PM Eastern Time (US and Canada)
Meeting Link: https://utoronto.zoom.us/meeting/register/tZEtdO-przMvGdDPobbEbZ_5m6sp-4C4ylP_

For those of you who are new as graduate students in ECE, ECEGSS is the Electrical and Computer Engineering Graduate Students’ Union. It is the student government body representing all graduate students within ECE. ECEGSS holds events for ECE graduate students, including social, academic, professional development, and health and wellness events. ECEGSS also sends representatives to UTGSU, GECoS, and the Engineering Faculty Council.

Shashank Motepalli
ECEGSS President

Nominations for ECEGSS 2021-2022

Hi Everyone,

Nominations for the ECE Graduate Students’ Society 2021-2022 is ongoing till September 17 at 11:59 PM EDT.

Any ECE graduate student (MEng, MASc, PhD, including newly enrolled students)
may nominate themselves for one or more positions.

To nominate yourself, please fill out this form:
https://forms.gle/dtuB6rGNoUSqGvq69  with the list of positions that
interest you.

The elections will be online. A link will be circulated for voting.
The voting will start on Friday, September 24, 2021, at 3pm EDT and
end on Monday, September 27, 2021, at 3pm EDT.

ECEGSS is dedicated to improving student wellness, and I am glad that
I took part in it last year.

Looking forward to hearing from you,
Rahul Gulve
ECEGSS Chief Returning Officer

TechTalk#04 – Stathera

We are excited to invite all of you again to attend the fourth
TECHNICAL TALK, TECH-TALK, in the INDUSTRY EXPOSURE SERIES.

We are hosting this event with Stathera https://www.stathera.com/
In this event, speakers from Stathera
will share their experience with TandemLaunch. The speakers from

Information about INTERNSHIP & FULL-TIME EMPLOYMENT OPPORTUNITIES
at the company will follow the event.

We will be giving out one of Amazon(Canada) or UberEats(Canada)
GIFT-CARDS (CAD 15 each) to the attending graduate students of the ECE
department  of the University of Toronto who register and attend the
event for more than 30 minutes.

Please find more information about the event below.
===================================================
EVENT INFORMATION
—————————————————
DATE        : Thursday, Sep 2, 2021
TIME        : 11 AM – 12 PM
REG. LINK   :
https://utoronto.zoom.us/meeting/register/tZUrdeyppjspH9KS7J_dxO0sLsr8A9wyKtuo
===================================================
TITLE:
Novelties and Challenges in Designing High-Precision Resonators, Oscillators and Clock References
===================================================
ABSTRACT:
—————————————————
In this TechTalk we are going to start by presenting Stathera as a company, who we are, and why we are working on our mission to improve the 100 years old timing market based on quartz oscillators and give it a complete technological makeover. We are going to explain why we think the change is going to happen and why we think now is the time to do so. After this introduction, we will dive deeper into some of the challenges when it comes to designing high precision MEMS resonators. We are also going to talk about the difficulties of merging MEMS with an integrated circuit designed to sustain the resonator oscillations, compensate for the temperature drifts and improve the overall performance of the system. Most of the technical talk will be dedicated to the ASIC design, where we will present all the functions that need to be implemented on the circuit side in order to satisfy the increasingly demanding requirements of the modern wireline and wireless communication protocols. We will start from the system level aspects, but we will also cover some of the crucial subsystems and talk about topics such as TIA design, PLL design, temperature sensing, sigma-delta ADCs design, curvature-correction and calibration, high-voltage charge-pump design, and many more. We will also talk about design methodologies when it comes to designing high-precision high-resolution, but low-speed and low-power systems.

===================================================
SPEAKER BIO.:
===================================================
—————————————————
NIKOLA KATIC, Director of ASIC Engineering and Development
—————————————————
Nikola received the Ph.D. degree in electrical engineering from the Swiss Federal Institute of Technology Lausanne (EPFL), Lausanne, Switzerland in 2014. He was also a Postdoctoral Fellow with the Department of Electrical and Computer Engineering, University of Toronto, Canada, in 2016 and 2017. Nikola’s academic interests were mostly related to CMOS image sensors and computational cameras. Besides this, between 2014 and 2021, Nikola held Senior R&D engineering roles in the field of integrated circuit design with Samsung Electronics, Intel Corp and Synopsys Inc, working on plenty of cutting-edge technological solutions such as High-Bandwidth Memories, PCIe5 and 112G XSR wireline transceivers, and integrated circuit processes all the way down to 7nm FinFets. He authored and co-authored 15+ scientific publications. His research and professional interests are: high-precision timing circuits (PLLs, DLLs and CDRs), DFEs and ADCs, CMOS image sensors and temperature sensors, high-voltage charge-pumps and many more. Nikola joined Stathera in April 2021 as a Director of ASIC Engineering and Development.
—————————————————
DANNY GANGAPERSAUD, Vice President, Business Development & Marketing
—————————————————
Danny has 22 years of experience in the semiconductor industry. In his most recent role, Danny was responsible for account & business development in Eastern Canada for Honeywell Sensing & IoT where he received the President’s club award for new business growth with sensors. Prior to that, he was Director, Technical Marketing at Bosch, the world’s leading MEMS sensor manufacturer where he was responsible for the MEMS microphone portfolio and drove global business development / customer acquisition and go-to-market strategies for wearable, IoT, smartphones and other consumer devices. Earlier in his career, he was a staff engineer at NEC Electronics America (now Renesas) with responsibility for then-emerging automotive infotainment market segment, where he drove the design-in efforts for MCU/SoC and was recognized for his contribution in achieving world’s #1 market share position for V850 32-bit microcontroller. Danny earned a BSc. Electronics Engineering from DeVry University and an MBA in International Business from LeTourneau University. He leads the business development & marketing strategies for MEMS timing solution at Stathera, Inc.
—————————————————

Cheers
ECEGSS

Ride/Walk/Run with ECEGSS

We are thrilled to repeat our bi-weekly running/biking/walking event. Ride/Walk/Run with ECEGSS again this summer to stay fit, get gifts, stay connected, and feel empowered!

As an incentive, we provide $20 Amazon Gift Cards to achieve at least one of the following goal(s). To claim your gifts, please use a fitness app (e.g., Strava, Nike, etc.) and upload your data to claim the gifts.
2 hours of biking
1 hour of running and/or
4 hours of walking

You will be responsible for making sure you provide authentic information as requested in the following link: https://forms.gle/hibWYSxP8uJUi88t9

If you participated previously – Participants exceeding their records in our previous event in two of the three categories will get an additional $10 in their gift cards!!

Cheers
ECEGSS
https://www.instagram.com/ecegssofficial/
https://twitter.com/UofTECEGSS